PUBLICATIONS BY FACULTY AND STUDENTS

• •  A book chapter in Springer in the Machines, Mechanisms and Robotics as part of book series: “Lecture notes in Mechanical Engineering”, entitled, “Motion Control of a Phalange Using Tendon-Based Actuation System: A Bond Graph Approach”, p. 1479–1486, doi: https://doi.org/10.1007/978-981-16-0550-5_141
  • Uppal, S. K., & Vaz, A. (2022). Bond Graph Modeling of Muscle-Tendon Actuation of a Phalange. Computer Assisted Methods in Engineering and Science, 29(3), 197–227. https://doi.org/10.24423/cames.411
  • Uppal, S.K., Vaz, A. (2024).  Modeling the circumduction mechanism of thumb metacarpal through muscle-tendons actuation using bond graph. Research on Biomedical Engineering, Springer. https://doi.org/10.1007/s42600-024-00364-5
  • Uppal, S., Vaz, A. (2021). Motion Control of a Phalange Using Tendon-Based Actuation System: A Bond Graph Approach, iNaCoMM 2019, IIT, Mandi
  • Uppal, S.K., (2007). Vacuum Cooling Technology for Food Industry, Punjab Science Congress, DAVIET Jalandhar.
  • Uppal, S.K., Sahni GD, Sethi, APS (2010). Study of Flow Characteristics, and Modification in the Disc Design of Butterfly Valve, AME-2010, BBSBEC, Fatehgarh Sahib.
  • Uppal, S.K., Sadana P., Priyadarshi D. (2013). In Situ Metal Matrix Composites: Review of Microstructural and Mechanical Characteristics, NCST-2013 at DAVIET, Jalandhar.
  • Uppal, S.K., Vaz A.J, Sethi, APS (2012). Study of Dynamics of Rigid Rolling Disc over Robotic Thin Soft-Finger, IDEA-12, BGIET, Sangrur.
  • Uppal, S.K., Sharma M., Kohli A. (2013). CAD Model Generation using Reverse Engineering Techniques- A Review, NCST-2013 at DAVIET, Jalandhar.
  • Devinder Priyadarshi and Rajesh Kumar Sharma, “Porosity in aluminium matrix composites: Cause, Effect and Defence”, Materials Science- An Indian Journal, 14(4), 2016, 119-129.
  • Devinder Priyadarshi and Rajesh Kumar Sharma, “Optimization for Turning of Al-6061-SiC-Gr Hybrid Nanocomposites Using Response Surface Methodologies”, Materials and Manufacturing Processes, 31, 2016, 1342-1350.
  • Devinder Priyadarshi and Rajesh Kumar Sharma, “Effect of type and percentage of reinforcement for optimization of the cutting force in turning of Aluminium matrix nanocomposites using response surface methodologies”, J. Mechanical Science and Technology, 30, 2016, 1095-1101.
  • Ankush Kohli, H. S. Bains, Sumit Jain and Devinder Priyadarshi, “Machinability and Wear of Aluminium based Metal Matrix Composites by MQL – A Review”, Materials Science Research India (Accepted-2017)
  • Vimanyu Chopra and Devinder Priyadarshi, “Information Security through Image steganography”, International Journal of Engg. And advanced technology Vol. 9, Issue 1, 2019, pp 9649-6956
  • Vimanyu Chopra and Devinder Priyadarshi, “Role of Machine Learning in Manufacturing sector”, International journal of Recent Technology and Engineering Vol. 8, Issue 4, 2019, pp 2320-2328.
  • Devinder Priyadarshi, Pankaj Sadana & S K Uppal, “In Situ Metal matrix composites: Review of Microstructural and Mechanical Characteristics”, In Proceedings of DAVNCST-2013, May 30-31, 2013.
  • Gourav Singh, Gurpreet Singh and Devinder Priyadarshi, “A review on machine theory, Tool wear, Tool coating, Meso Tool Design with a view to develop Micro and Nano Machining Processes”, In Proceedings of 3rd DAV National Congress: Science, Technology, Engineering, Humanities and Management (STEHM-2016), May 20-21, 2016, 19-22.
  • Kashish Goyal, Vivek Vij and Devinder Priyadarshi, “Processing and properties of Magnesium matrix composites: A short review”, In Proceedings of 3rd DAV National Congress: Science, Technology, Engineering, Humanities and Management (STEHM-2016), May 20-21, 2016, 23-27.
  • Sumeet Bhardwaj, Ashwani Gulati and Devinder Priyadarshi, “Tool selection for the machining of MMCs”, In Proceedings of 3rd DAV National Congress: Science, Technology, Engineering, Humanities and Management (STEHM-2016), May 20-21, 2016, 32-34.
  • Devinder Priyadarshi, “Transforming Governance practices in Indian Banking in context of VUCA World”, International Conference: Managing in VUCA world: Opportunities and Challenges in Future Workplace, NDIM/AICTE, June 7th, 2019.
  • Chetan Darshan, Dr. Lakhvir Singh and Dr. APS Sethi “Analysis and Optimization of ceramic cutting tool in hard turning of EN-31 using Factorial Design”, International Journal of Mechanical and Industrial Engineering (IJMIE), ISSN No. 2231 –6477, Vol1, Issue4, 2012.
  • Poddar, C. Darshan, and S. Saini, “Performance Evaluation of PVD Coated Ceramic Insert Using AISI 52100 in Hard Turning,” IPASJ Int. J. Mech. Eng., vol. 4, no. 5, pp. 58–66, 2016.
  • Darshan, C., Singh, P., Saini, S. and Goswami, R. (2017), “Comparative Evaluation of Untextured and Textured WC Inserts Under Dry and Near Dry Machining of C45 Steel”, International Journal of General Engineering and Technology (IJGET) 6 No. 5, pp. 1–16.
  • Chetan Darshan, *Shiraz Deep Gumber, Vinay Goel, Manvir Singh, N. G. (2017) ‘Comparative evaluation of MQL and dry machining of C45 steel using uncoated w/c inserts’, International Journal of Advanced Research and Development, 2(5), pp. 567–573.
  • Darshan, Chetan, et al. (2019) “Machinability improvement in Inconel-718 by enhanced tribological and thermal environment using textured tool.” Journal of Thermal Analysis and Calorimetry: 1-13. https://doi.org/10.1007/s10973-019-08121-y
  • Darshan, S. Jain, and M. Dogra, “Effect of deep cryogenic cooling on machining of Inconel 718 using surface textured tool,” Int. J. Res. Anal. Rev. (IJRAR, vol. 6, no. 1, pp. 1379–1388, 2019.
  • Darshan C, Jain S, Dogra M, et al (2019) “Influence of dry and solid lubricant-assisted MQL cooling conditions on the machinability of Inconel 718 alloy with textured tool.” Int J Adv Manuf Technol. doi: 10.1007/s00170-019-04221-z
  • Chetan Darshan, Dr. Lakhvir Singh and Ashok Kumar, “Flywheel Energy Storage System- A review”, National Conference on Advances in Mechanical Engineering, Baba Banda Singh Bahadur Engineering college, Fatehgar Sahib, Pb. (AMA-2010). 
  • Chetan Darshan, Dr. Lakhvir Singh and Dr. APS Sethi “Analysis and Optimization of ceramic cutting tool in hard turning of EN-31 using Factorial Design”, International Conference on Mechanical and Industrial Engineering, Organised by InterScience research Network (India) Interscience Campus, Bhubneshwar.(ICMIE-2012). 
  • Gurveen Singh, Dinesh Kumar Shukla “Selection and Mechanism of Using Active Gas in GTAW Process: A Review” Journal of Materials & Metallurgical Engineering, Volume 8, Issue 1, 2018, pp- 49-61. 
  • Gurveen Singh, Dinesh Kumar Shukla “Effect of oxide powders on austenitic stainless-steel welding by Active GTAW Process”VIVECHAN International Journal of Research 9, Issue1, 2018, pp 70-80. 
  • Gurveen Singh, Dinesh Kumar Shukla “HAZ formation and analysis in flux assisted GTAW”International Journal of Advanced Materials Manufacturing and Characterization. Volume 8, Issue 2, 2018, pp 9-74. 
  • Gurveen Singh, Sunny Sihag, Abhishek Gupta, Nikhil Sharma, Jayanth Gupta “Optimization and Analysis of LCV/HCV Chassis using FEM Technique – A Review” INTERNATIONAL JOURNAL OF SCIENTIFIC PROGRESS AND RESEARCH (IJSPR) Issue 114, Volume 40, Number 03, October 2017. ISSN: 2349-4689. 
  • Vishal Sharma , Ankush ,Amanpreet Singh , Hardildeep Singh ,Nikhil Sharma ,Gurveen Singh “Review on Optimization of Machining Parameters for Milling Operations” INTERNATIONAL JOURNAL OF SCIENTIFIC PROGRESS AND RESEARCH (IJSPR) Issue 115, Volume 40, Number 04, October 2017. ISSN: 2349-4689. 
  • Vishal Sharma, Ankush,  Amanpreet Singh, Nikhil Sharma, Hardildeep Singh, Gurveen Singh “Machining Parameters Optimization for End Milling of Stainless Steel 304”  INTERNATIONAL JOURNAL OF SCIENTIFIC PROGRESS AND RESEARCH (IJSPR) Issue 118, Volume 42, Number 01, December 2017. ISSN: 2349-4689. 
  • Ankush Kohli, Gurveen Singh, Ankit, Prabal, Abhishek “Wear Characteristics of Aluminium Based MMCs – A Review” International Journal of Research and Analytical Reviews (IJRAR) December 2018, Volume 5, Issue 12, (E-ISSN 2348-1269, P- ISSN 2349-5138)pp 725-730. 
  • “Effect of process parameters in Friction Stir Welding: A Review” Gurveen Singh, National conference held at DAVIET, Jalandhar in June 2013. 
  • “Future Fuels for S.I. Engines – A review” Sahil Saini, Gurveen Singh, Current trends in Mechanical Engineering, National Conference held at DAVIET, Jalandhar , May 2016. 
  • “Effect of active flux on weld bead geometry, mechanical and metallurgical properties of 304 stainless steel in Gas tungsten arc welding process” Gurveen Singh , Jonty Mago, Gurpreet Singh, Current trends in Mechanical Engineering, National Conference held at DAVIET, Jalandhar , May 2016.
  • Gurveen Singh, Dinesh Kumar Shukla “Structure-property Interaction in Flux Assisted Tungsten Inert Gas Welding of Austenitic Stainless Steel” International Journal of Engineering TRANSACTIONS A: Basics Vol. 31, No. 1, (January 2019) pp99-105. ISSN 1728-1431.Gurveen Singh, Sunny Sihag, Abhishek Gupta, Nikhil Sharma, Jayanth Gupta “Material Optimisation Along with Realigning of Connecting Members of LCV/HCV Chassis” INTERNATIONAL JOURNAL OF SCIENTIFIC PROGRESS AND RESEARCH (IJSPR) Issue 116, Volume 41, Number 01, November 2017. ISSN: 2349-4689.Sahil, Gurveen Singh, Pankaj Sadana “Investigation of ethanol blends in S.I engine” International Journal of Creative research Thoughts, Volume 5 Issue 4 December 2017. ISSN 2320-2882.Prabhjit Singh, Sanjeev Saini, Ankush Kohli, Gurveen Singh, H.S. Bains “Spring Design Optimization By Improved Grey Wolf Optimization” International Journal of Research and Analytical Reviews (IJRAR), January 2019, Volume 06, Issue 1, (E-ISSN 2348-1269, P- ISSN 2349-5138)pp 692-702.
• • “Wear Analysis of Friction Stir Processed Aluminium Alloy Surface Composites” Piyush Gulati,  A. Nihal, Dinesh Kumar Shukla, Jaiinder Preet Singh, Harpinder Singh & Gurveen Singh, Recent Advances in Sustainable Technologies. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-0976-3_24. May 2021.
  • Gaurav Dhuria, “A Review on Friction Stir Welding of Aluminium Metal Matrix Composites” 2015.
  • Gaurav Dhuria, “Multi response optimization of Parameters in Electric Discharge Machining of Al/Si-C hybrid composite using Grey relational Analysis” 2015.
  • Gaurav Dhuria, “Investigation and Modelling of EDM process parameters in machining of Incoloy-800”
  • Saini, S., (2015) ‘Material Parameter and Effect of Thermal load on functionally Graded Cylinders’. International journal of Modern engineering Research ,Vol. 5, No 4, Impact Factor: 1.103. ISSN:2249-6645
  • Sanjeev Saini, Jaspreet Singh, Harpreet Singh (2015) “Effect of Electrical Discharge Machining Parameters Al-B4c Composites” International Journal of Engineering & Science Research .IJESR/July 2015/ Vol-5/Issue-7/896-898. ISSN 2277-2685, Impact Factor 0.675
  • Sanjeev Saini,Jaspreet Singh, Harpreet Singh (2015) “OPTIMIZING THE MACHINING PARAMETERS OF EDM FOR 304 AND 316 STAINLESS STEEL “International Journal of Engineering & Science Research .IJESR/July 2015/ Vol-5/Issue-7/899-902, ISSN 2277-2685, Impact Factor 0.675
  • Sanjeev Saini,Jaspreet Singh, Harpreet Singh (2015) “Optimization of machining parameters in Electric Discharge Machining of 316 stainless steel “International Journal of Engineering & Science Research .IJESR/July 2015/ Vol-5/Issue-7/903-905, ISSN 2277-2685, Impact Factor 0.675
  • Sanjeev Saini, Jaspreet Singh, Harpreet Singh (2015) “Optimization of machining parameters in Electric Discharge Machining of High Speed steel by using U shape electrode “International Journal of Engineering & Science Research IJESR/July 2015/ Vol-5/Issue-7/906-908. ISSN 2277-2685, Impact Factor 0.675
  • Sanjeev Saini, Sunil Kumar & Dr. Balkar Singh, “Effect on Material Removal Rate (MRR) Of Hot Work Steel AISI H11 Material during Grinding With Silicon Carbide Wheel under Different Environmental Condition Using Taguchi Method”, International Journal of Innovations in Engineering & Technology (IJIET),Vol 6 (3), Feb-2016. Impact Factor: 0.672 , ISSN: 2319-1058.
  • Rachit Poddar, Chetan Darshan and Sanjeev Saini, “Performance Evaluation of PVD Coated Ceramic Insert Using AISI 52100 in Hard Turning”, IPASJ International Journal of Mechanical Engineering (IIJME) Volume 4, Issue 5, May 2016. ISSN 2321-6441. Impact Factor: 743
  • Sanjeev Saini, Gurudutt Sahni & Balpreet Singh, “A Review On Hardfacing And Wear Reducing Techniques On Industrial Valves,” IMPACT: International Journal of Research In Engineering & Technology (IMPACT: IJRET) ISSN (P): 2347-4599; ISSN(E): 2321-8843 Vol. 4, Issue 8, Aug 2016, 23-28.
  • Abhinav Shard 1 and Dr. Sanjeev Saini 2, “ Material Removal Rate during B4 C Abrasives Mixed Electrical Discharge Machining of Titanium Alloy ( Ti – 6Al -4V), International  Journal  of  Latest Trends in  Engineering  and  Technology  Vol.(7) Issue (3) ,  pp. 056‐062  DOI : http: // dx. doi.org / 10.21172 / 1.73.508  e‐ISSN : 2278‐621X
  • Rachit Poddar, Chetan Darshan and Sanjeev Saini, “Performance Evaluation of PVD Coated Ceramic Insert Using AISI 52100 in Hard Turning”, ISSN 2321-6441 (2016).
  • Devinder Priyadarshi and Rajesh Kumar Sharma, Porosity in aluminium matrix composites: Cause, Effect and Defence, Materials Science- An Indian Journal, Vol 14, Issue 04, 2016, 119-129., TSI Publications.
  • Devinder Priyadarshi, “Optimization for Turning of Al-6061-SiC-Gr Hybrid Nanocomposites Using Response Surface Methodologies”, Materials and Manufacturing Processes,
  • Devinder Priyadarshi and Rajesh Kumar Sharma, Effect of type and percentage of reinforcement for optimization of the cutting force in turning of Aluminium matrix nanocomposites using response surface methodologies, J. Mechanical Science and Technology, Vol 30, Issue 3, 2016, 1095-1101.Springer Publications.
  • Karandeep and Aman Maini, “Modeling of Electro-Hydraulic Power Steering System using Bond Graph Technique, International Journal of Science and Research (IJSR) 2319-7064, Volume 5 Issue 3, March 2016
  • Amardeep and Aman Maini, Modeling and Simulation of Two link flexible manipulator using bond graph. International Journal of Science and Research (IJSR) 2319-7064 Volume 5 Issue 3, March 2016
  • Chetan Darshan, Dr. Lakhvir Singh and Dr. APS Sethi, “ Analysis and Optimization of ceramic cutting tool in hard turning of EN-31 using Factorial Design” International Journal of Mechanical and Industrial Engineering (IJMIE) ISSN No. 2231 –6477/2012/0.509/5/11
  • Gourav Singh, Gurpreet Singh and Devinder Priyadarshi, “A review on machine theory, Tool wear, Tool coating, Meso Tool Design with a view to develop Micro and Nano Machining Processes”, In Proceedings of 3rd DAV National Congress: Science, Technology, Engineering, Humanities and Management (STEHM-2016), May 20-21, 2016, 19-22.
  • Kashish Goyal, Vivek Vij and Devinder Priyadarshi, “Processing and properties of Magnesium matrix composites: A short review”, In Proceedings of 3rd DAV National Congress: Science, Technology, Engineering, Humanities and Management (STEHM-2016), May 20-21, 2016, 23-27.
  • Sumeet Bhardwaj, Ashwani Gulati and Devinder Priyadarshi, “Tool selection for the machining of MMCs”, In Proceedings of 3rd DAV National Congress: Science, Technology, Engineering, Humanities and Management (STEHM-2016), May 20-21, 2016, 32-34.
  • Sheetal Soda, “GSCM: practices, trends and prospects in Indian context”. Journal of Manufacturing Technology Management, 1741-038X/2105
  • Sheetal Soda, ” Literature review of multi-aspect research works carried out on the concept and implementation of GSCM, International Journal of Industrial and Systems Engineering, 1748-5037/2016
  • Sheetal Soda, “Implementation of green supply chain management in India: Bottlenecks and remedies” The Electricity Journal, 2016
  • Gurveen Singh, “Effect of active flux on weld bead geometry, mechanical and metallurgical properties of 304 stainless steel in Gas tungsten arc welding process” National Conference at DAVIET, 2016
  • Gurveen Singh “Future Fuels for S.I. Engines – A review” National Conference at DAVIET, 2016

 International Conferences 

1. Saini, S., (2015), “Regression Vs Neuro-Fuzzy Model: A comparison for residual stress, surface roughness, tool wear during hard turning,” International Research Conference on Computer Science & Mechanical Engineering (IRCCSME) held at Bangalore on 23rd of August, 2015.
2. Gurudutt Sahni, Sanjeev Saini, Balpreet Singh & Manpreet, “Optimization Using Taguchi Method In Solving Industrial Problems By Controlling Wear In Industrial Valves”, International Conference on sciences,Engineering &Technical Innovations (ICSETI-2016) held at CTIEMT,Jalandhar on 3^rd & 4^th of June
3. Gourav Singh, Gurpreet Singh and Devinder Priyadarshi, “A review on machine theory, Tool wear, Tool coating, Meso Tool Design with a view to develop Micro and Nano Machining Processes”, In Proceedings of 3rd DAV National Congress: Science, Technology, Engineering, Humanities and Management (STEHM-2016), May 20-21, 2016, 19-22.

National Conferences

1. Uppal, S., Vaz, A. (2021). Motion Control of a Phalange Using Tendon-Based Actuation System: A Bond Graph Approach, iNaCoMM 2019, IIT, Mandi.
2. Sunil kumar & Sanjeev Saini, “Effect on Surface Roughness of Hot Work Steel AISI H11 Material during Grinding With Silicon Carbide Wheel under Different Environmental Condition Using Taguchi Method”, Presented and published in PTU sponsored 3^rd DAV National congress on Science, Technology Engineering, Humanities & Management on May. 20-21, 2016, At DAV Institute of Engineering & Technology, Jalandhar, Punjab.ISBN

3. Jitender Mittal , Sanjeev Saini ,Rakesh Bhatia & Namrta , “Impact Performance of Aluminium (5083) Plates Welded by Friction Welding Process”, Presented and published in PTU sponsored 3^rd DAV National congress on Science, Technology Engineering, Humanities & Management on May. 20-21, 2016, At DAV Institute of Engineering & Technology, Jalandhar, Punjab.ISBN
4. Kashish Goyal, Vivek Vij and Devinder Priyadarshi, “Processing and properties of Magnesium matrix composites: A short review”, In Proceedings of 3rd DAV National Congress: Science, Technology, Engineering, Humanities and Management (STEHM-2016), May 20-21, 2016, 23-27.
5. Sumeet Bhardwaj, Ashwani Gulati and Devinder Priyadarshi, “Tool selection for the machining of MMCs”, In Proceedings of 3rd DAV National Congress: Science, Technology, Engineering, Humanities and Management (STEHM-2016), May 20-21, 2016, 32-34.